A polymer pool is a kind of protected area for water storage, which is made with plastic walls made of polymer and is used in areas such as agriculture, fish breeding, etc. In recent years, in the fields of industry and agriculture, water storage in large dimensions has always been one of the main concerns. The problem of water shortage as well as the increasing temperature of the air, which causes a significant amount of water to be wasted, has caused the artisans to look for an effective way to maintain and store water in their areas of need. One of these methods is the use of a polymer pool. The special features of these pools have led to a significant increase in their use today.
Implementation of the polymer pool
The steps of building and implementing a polymer pool are as follows: In order to build a polymer pool, the necessary information about the type of soil and the dimensions of the pool must be obtained first. Polymer pools can be dug in three ways: in the ground, on the ground, or combined. After obtaining information and deciding on the type of excavation, soil removal operations are carried out and the operation is carried out with the appropriate slope of the soil, which in most cases is 1 to 1 or 45 degrees. In the next step, all surfaces, including the floor and walls of the excavated space, should be leveled well and any sharp and hard objects such as stones and foreign objects should be separated from it. If it is not possible to remove and remove the objects, you can use an operation called underlaying, using lime or straw, which helps to cover the surface of the object. Channels parallel to the pool, which are dug at a distance of about 50 cm from the wall and are used for the placement of polymer sheets, are another step in the implementation of the polymer pool. In the next step, the polymer sheets are placed in the prepared channels and are well secured using welding operations and also with the help of materials. Water extraction is the last stage of the implementation of these pools, which should be done in 2 to 3 stages. Remember that a polymer pool, just like traditional pools and other water systems, needs a variety of pool equipment. Equipment such as pool pump, sand filter, pool heat exchanger, etc. Definitely, no swimming pool can be set up without pool equipment and pool purification devices.